Difference between revisions of "Using external programmers (USBasp)"

From Tuxamito
Jump to: navigation, search
(Created page with "Sometimes one will need to program an Arduino board that does not have a programming interface or will want to build a custom one using and Atmel AVR chip. If the chip contain...")
(No difference)

Revision as of 20:42, 21 March 2016

Sometimes one will need to program an Arduino board that does not have a programming interface or will want to build a custom one using and Atmel AVR chip. If the chip contains no bootloader or we do not have a serial interface we can use an external ICSP programmer, such as the USBasp. In this page we will explain how to use such programmer.

USBasp description

USBasp is a USB in-circuit programmer for Atmel AVR controllers. The programmer uses a firmware-only USB driver, no special USB controller is needed.

Features:

  • Works under multiple platforms such as GNU/Linux, Mac OS X.
  • Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits.
  • No special controllers or smd components are needed.
  • Programming speed is up to 5kBytes/sec.
  • SCK option to support targets with low clock speed (< 1,5MHz).
  • 10 pin ISP interface (conforms to standard ISP 10-pin pinout).

More info: http://www.fischl.de/usbasp/