Arduino Environment and Esp8266 - Revision history

Daniel at 11:00, 12 May 2016

2016-05-12T11:00:41Z

2016-04-30T09:09:24Z

‎Timer 0 Example

2016-04-28T16:29:02Z

‎Blink

2016-04-28T16:25:44Z

‎Timer 0 Example

2016-04-27T10:19:00Z

‎Test Programs

2016-04-27T08:21:19Z

‎Test Programs

2016-04-26T15:54:15Z

‎Test Programs

2016-04-26T15:48:33Z

2016-04-26T13:26:15Z

‎Installation

2016-04-26T13:12:26Z

@@ Line 10: / Line 10: @@
 [[File:esp8266_arduino_01.png]]
-* Then go to "Tools -> Boards -> Boards Manager" and in the box "Type" select “Contributed”.  Select the “esp8266 by ESP8266 Community” package and click the “Install” button.
+* Then go to "Tools -> Boards -> Boards Manager" and in the box "Type" select “Contributed”.
 [[File:esp8266_arduino_02.png]]
 * Now you can select the board for developing from "Tools -> Boards->ESP8266 Modules" and choose the board you want to program.
-[[File:esp8266_arduino_03.png]]
+[[File:esp8266_arduino_04.png]]
 = Test Programs =

@@ Line 99: / Line 99: @@
 <syntaxhighlight lang="C" line="0">
-void inline timer0_ISR (void){
+void timer0_ISR (void){
    // Do some work
    ...

@@ Line 24: / Line 24: @@
 For the pin mapping see [[NodeMCU#Pin_Mapping_for_Arduino_IDE]]
-<syntaxhighlight lang="C" line="1" >
+<syntaxhighlight lang="C" line="0" >
 int pin = 16; // D0 pin in NodeMCU
 int i = 0;

@@ Line 98: / Line 98: @@
 === Timer 0 Example ===
-<syntaxhighlight lang="C" line="1">
+<syntaxhighlight lang="C" line="0">
 void inline timer0_ISR (void){
    // Do some work

@@ Line 90: / Line 90: @@
 void loop() {
     ...
+}
 </syntaxhighlight>

@@ Line 50: / Line 50: @@
 == Connecting to Wifi Access Point ==
-<syntaxhighlight lang="C" line="1" >
+<syntaxhighlight lang="C" line="1">
 const char* SSID_NAME = "..." // WiFi SSID Name
 const char* SSID_PASS = "..." // WiFi SSID Password
    ...
-waitMaxWifi = 0;
+  WiFi.mode(WIFI_AP);
-WiFi.mode(WIFI_STA);
+  WiFi.softAP(SSID_NAME, SSID_PASS);
-WiFi.begin(SSID_NAME, SSID_PASS);
-while (WiFi.status() != WL_CONNECTED && waitMaxWifi < 30) {
+void loop() {
-  delay(1000); // Wait or do something useful
+   ...
+}
 </syntaxhighlight>

@@ Line 41: / Line 41: @@
    Serial.println(i);
    i++;
-   digitalWrite(pin, HIGH);   // turn the LED on (HIGH is the voltage level)
+   digitalWrite(pin, HIGH); // turn the LED off by making the voltage HIGH
    delay(100);              // wait for a second
-   digitalWrite(pin, LOW);    // turn the LED off by making the voltage LOW
+   digitalWrite(pin, LOW);  // turn the LED on by making the voltage LOW
    delay(900);              // wait for a second
+}
@@ Line 49: / Line 49: @@
 == Connecting to Wifi Access Point ==

@@ Line 2: / Line 2: @@
 Arduino IDE 1.6.x or newer is needed (I tried it on version 1.6.8).
-# Go to "File -> Preferences" and in the field "Additional Boards Manager URLs" introduce <code>http://arduino.esp8266.com/stable/package_esp8266com_index.json</code> and click OK.
+* Open the Arduino IDE and go to "File -> Preferences"
-# Then go to "Tools -> Boards -> Boards Manager" and in the box "Type" select “Contributed”.  Select the “esp8266 by ESP8266 Community” package and click the “Install” button.
-# Now you can select the board for developing from "Tools -> Boards->ESP8266 Modules" and choose the board you want to program.
+[[File:esp8266_arduino_00.png]]

← Older revision	Revision as of 13:12, 26 April 2016
(No difference)