Cross-compile toolchains

These are already built toolchains optimized for arm1176jzf-s CPUs, such us in Samsung s3c6410 (mini6410 board) and the Broadcom BCM2835 (Raspberry Pi).

Download

Important: Select if you need softfloat or hardfloat toolchain. More information on soffloat vs hardfloat.

View all toolchains

Soft Float

Version	Date	Type	Notes	32 bit	64 bit
gcc 4.7.2 linaro 13.04	2013-04-16	Stable		Download	Download
gcc 4.8.0 linaro 13.04	2013-04-16	Testing	- Do not use to build kernel - More c++11	Download	Download

Hard Float

Version	Date	Type	Notes	32 bit	64 bit
gcc 4.7.2 linaro 13.04	2013-04-16	Stable		Download	Download
gcc 4.8.0 linaro 13.04	2013-04-16	Testing	- Do not use to build kernel - More c++11	Download	Download

Install

1. Download the desired toolchain version.
2. As root (or using sudo) unpack the file
   tar jxvf arm-linux-gcc-4.x-xxxx.xx-arm1176jzfsxf-TuxamitoSoftToolchains-x86_x.tar.bz2 -C /
   This will automatically install it in the folder /opt/TuxamitoSoftToolchains/
3. Add the binaries location (/opt/TuxamitoSoftToolchains/arm-arm1176jzfsxf-linux-gnueabi/gcc-linaro-4.x-xxxx.xx/bin) to the PATH variable:
   • Temporally: export PATH=$PATH:/opt/TuxamitoSoftToolchains/arm-arm1176jzfsxf-linux-gnueabi/gcc-linaro-4.x-xxxx.xx/bin (for one use)
   • Permanently: adding "PATH=$PATH:/opt/TuxamitoSoftToolchains/arm-arm1176jzfsxf-linux-gnueabi/gcc-linaro-4.x-xxxx.xx/bin" to your ~/.bashrc file
4. If it is correctly installed then executing arm-linux-gcc -v should show the gcc version.