Difference between revisions of "TWS Set Up Guide"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | == Base System == | ||
| + | Install the Raspbian image (this tutorial is based on 2014-12-24). | ||
| + | |||
| + | sudo dpkg-reconfigure locales | ||
| + | |||
| + | During first boot, with raspi-config or manually enable i2c and spi. | ||
| + | |||
| + | |||
Enable daemon: | Enable daemon: | ||
| + | |||
echo 1 > /sys/module/i2c_bcm2708/parameters/combined | echo 1 > /sys/module/i2c_bcm2708/parameters/combined | ||
| + | |||
tws | tws | ||
Latest revision as of 12:22, 8 January 2015
Base System
Install the Raspbian image (this tutorial is based on 2014-12-24).
sudo dpkg-reconfigure locales
During first boot, with raspi-config or manually enable i2c and spi.
Enable daemon:
echo 1 > /sys/module/i2c_bcm2708/parameters/combined
tws
